Everything You Need to Know About Investing

To become successful with your money, you have to make your money work for you. You sell your labor which in return makes you money. By making each individual dollar work for you, this in return makes you wealthy over time. There are a plethora of investing opportunities out there. The key is to figure out which one is the right one for your financial situation.

Stocks
The most popular of all investing opportunities, are stocks. Stocks are probably the main thing you think of when you hear of investing. When you buy a stock, you buy partial ownership of a company. Stocks range anywhere from $2, to $12,000, which can appeal to a large variety of people. To be successful when trading stocks, you have to buy low and sell high. Of course this isn’t easy, considering the market is always fluctuating. You need to watch the history of the company, know the PE Ratio, the day range, the 52 week range, etc. Knowing this information can help you predict if the stock will go up or down. You can make a lot of money investing in stocks, which means you can also lose a lot of money. You want to keep in mind that most investments in stocks are long term investments. It is very risky investing, but if you do the proper research of the history of the company, you can get a very good return.

Stock Investing Tips

1.) Have the Right Expectations
When you are investing in stocks, you want to make sure you aren’t expecting to become Warren Buffet over night. It just wont happen. You want to make sure you do the proper amount of research, and make sure you know the history of the market as well as the company you are investing in. When investing in stocks, the return is around 10%-13%. You don’t want to make hasty decisions and buy and sell a lot just because you aren’t making the money you expected. Make sure you know how long you are keeping an investment, and then make a commitment. This will help you focus on the principles.

2.) Don’t Listen to the Media
Don’t get caught up in what everyone is talking about and what is being said around you. It will take your decision from being based on research and history, to just “hear-say”. This will hurt your investments immensely. Most of the hype and other things that are being said are just the daily fluctuation of the market.

3.) Stay Focused
You want to make sure you are putting all your effort and focus into your investments. Once you buy a stock, you own part of a company. Make sure you treat it the way it is and make sure you do the proper research of all aspects of what you’re investing in. Doing your research can change your investment of making a profit of $15,000, to losing $15,000. In the end, it’s always worth it to do the extra work.

Mutual Funds
When you invest in Mutual Funds, you are pooling your money with a number of other investors. You then pay someone to professionally manage and choose each individual security for you. There are a variety of different mutual funds you can choose to invest in, which range to fit your investment strategy.
3 Types of Mutual Funds
1.) Open-Ended
2.) Unit Investment Trust
3.) Close-Ended

Mutual Fund Investing Tips

1.) Look at the Fees
Always look at the fees involved when investing in Mutual Funds. When you pay more for something, this usually means that you are going to be getting a better product or service, right? Yes! Makes sure you find the best deal, but make sure you are investing the right amount of money in the right places. It can change the course of the whole investment in the long run.

2.) Research the History
One thing you can do to prepare an investment is to check out the history of the Mutual Fund. Just like anything, the history shows how well it has performed, and can be a good indicator. This can directly tell you if it will be a good investment whether it be long term or short term. Another thing you want to look at, is the asset of the fund. If it’s doing good, and there is a community of people investing in it, it can tell you if its a smart idea to invest yourself. Always check the history of any investment before you decide to purchase.

3.) Look at the Contract
You never know what is all involved until you take a detailed look at the prospectus provided by the fund. You want to make sure you don’t just know bits and pieces of what’s involved, but everything there is to know, and then some. Make sure you know all the fees involved with buying and selling funds, and if there are international fees required. Knowing this can help you determine if the company is a solid company where you can make money, or if you are getting into something you will regret in the future.

Bank Investments
Bank accounts are one of the simplest form of investment. Most banks give you a very small percentage for opening a bank account and giving them your money. This percentage barely beats the rise of inflation, so unless you are keeping hundreds of thousands of dollars in the bank, you won’t be creating any wealth from this form of investment. Another way to invest in your bank is a CD, or Certificate of Deposit. A CD if very similar to a bank account, but they are usually for a fixed amount of time. They can be monthly, every six months, a year, etc. the CD is then held until its maturity date, and paid back with interest. A Certificate of Deposit usually earns more money than an account at which you can withdrawal the money at any time, like a bank account.

Alternative Investments
Apart from the basic investments, there are other special securities. These investments include gold/silver, real estate, etc. These investments are speculative and can be very high profit, however; you need to have the knowledge.

1.) Gold & Silver
The first thing you want to do before you invest in gold or silver, is to look at the market and decide if now is the best time to invest in precious metals. You can also talk to a professional and decide when the best time to buy and sell would be. You want to make sure you are familiar with the variety of ways to invest in silver. You can invest in silver mining companies, silver ETF’s, silver futures, silver bullion, and also silver coins. You want to make sure the Exchange Traded Funds (ETF) are backed by physical gold and silver. Another thing to remember, is to not just own a paper owning, but the actual precious metal as well.

How to Improve the Performance of Your HDMI Cables

There are some useful guidelines to improve your HDMI cables performance.

Use signal boosters. Depending on quality, most HDMI wires lost their signal in roughly 10 to 50 feet. With these devices, power is enhanced making them to continue on remaining powerful even on long cable runs. There are, however, HDMI cables which run for 75 feet and have already a built-in signal booster inside the cable.

Use signal equalizers. This is another device which can maintain the signal’s quality and strength even with longer cable runs. It can also be called a signal enhancer. Aside from enhancing the signal, it can also eliminate any superfluous noise disturbance. Losing the dynamics of the HD technology is not something to worry about as the device does not remove it.

Use signal extenders. It helps by extending the signal down the extent of the cable subsequent to receiving the signal.

Use signal restorers. They are minute gadgets where weak signals are re-harmonized to reach their HDMI quality to the fullest. It expands the distance to have the signal trek even for over a hundred feet.

Use fibre Optic Cable. This is the best but the most expensive alternative. Fibre optic cables are normally utilized after a maximum of 150 feet run length was attained. Likewise, HDMI cables can reach a maximum of 1,649 feet efficient run with its fibre optic.

The quality of the raw materials used dictates the maximum run length and efficiency of the cables. Thicker copper wires in twisted pairs are usually on the category of higher value cables, but spell add-on expense on the part of the consumer but still with no guarantee of efficiency. Even high quality HDMI cables strive to transmit better signals for more than a distance of 50 feet.

You still need to invest in other add-on devices to enhance the signal of your HDMI cable over long distance.

Using Serialization

A common problem in programming is moving the program data to another spot, such as a file on disk or another computer. For example, suppose a video game needs to store a saved file on the hard drive. Normally, the developer would have to write a method that takes all the game information and puts it into a format that can be placed on disk. Another method needs to be written to reverse this. The concept of serialization, used in some programming languages, bypasses this.

If a language has serialization libraries, this means that these functions are built in. You can input an object and have built-in language libraries convert the object to data. And of course, you can do the reverse. Instead of having to write code and create your own format for storing program information, you can just have the language do it. This has a wide variety of uses besides the video game save file mentioned in the intro. Suppose you want any program to store user-inputted data. You can simply put that data into a serializable object, that write it to disk. When the program starts up again, use the deserialization methods.

This can also be used for network communications. Consider the problem of writing client and server programs that can communicate with each other. Instead of having to process data, you can just serialize the object and transmit its data over the network. As long as the client and server know what class is being used, this works.

However, not all programming languages can be serialized. Generally, this is only a feature of higher-level languages. .NET has it with the Serializable attribute for a class. For Java, the java.io.Serializable interface is used. Classes that implement this interface can be serialized. Even low-level languages such as C++ have the ability, albeit not in the standard library. The popular Boost C++ library has functions that provide the serialization ability.

However, there are also problems caused by serialization. Many languages do not have backwards compatibility. So if you write a new version of the program and try to use it with existing serialized data, it can fail. Fortunately, some languages do have backwards compatibility features that avoid this drawback.

Serialization is a useful tool that all programmers should know about. It provides an easy way to store program data permanently and transmit it between multiple computers. For languages where serialization libraries are built-in, this is generally very easy.

Getting the Best Drain Unclogging Nearby Essex County NJ

If you have a backed up sink full of hair or food, you will need drain unclogging nearby Essex County NJ. Of course, you can try drain unclogging materials bought over the counter at your local grocery store or hardware store like Home Depot. However, for bigger clogs, you will need a professional such as a plumber or someone who specializes in drains. If it gets to the point that you need a professional, there are several things that you should make sure to get in order to have the best possible experience for both you and your family.

First, you should make sure to know what the hours of operation are for any professional. If their schedule doesn’t align with yours, that will be a problem. If there is a drain emergency on Saturday night at 1 AM, then you might have to find someone else to help you with the drains. Nights and weekend availability might be something that you should think about when selecting a professional.

Second, you should make sure you get an estimate of the work to perform. This way, you will have a good idea of the effect it will have on your household budget. Also, there is much less likely to be any huge surprises after the work agreed upon is completed. This is good for everyone involved to ensure that nobody is unhappy.

Finally, you should understand the payment options. Is financing available? If so, what is the interest rate and terms? Do they accept electronic payments such as VENMO or CashApp? Or can you PayPal it? Another possibility is a cash or check option but if you get that, make sure you get a receipt and/or ask for a discount. These are just a few of the things you should think about when dealing with your home plumbing system. Best of luck!

lessons learned about advisors

Automobiles have become an integral part of our society. Intended to be used as a tool to get from point A to point B cars have extended their use in today’s society.

This article discusses a few points on car selection and personality. Cars have long stopped being tools that get us from one point to another and have transformed into status symbols and reflect the driver’s values and personality.

Often people judge a person by the car they drive. If you are stepping out a Bentley for example, you would garner much respect from just about anyone who witnesses you getting out of the car.

The condition and look of your car has extended the mantra of your discipline being reflected on how your wear your clothes. Being seen parking a dirty car is the equivalent to going to the office in a disheveled suit. Analogously, alighting from an impeccably detailed car is the prim and proper look that many office executives are known for.

In fact nowadays what you drive adds more to your reputation than what you wear. Studies have shown than rides reflect more of the personality of the person than clothes. Cars have ceased becoming tools and have transcended into the realm of lifestyle.

Playboys want fast looking coupes while daddies are opting to get minivans. Buicks are said to cater to the less internet savvy drivers compared to Honda which has an overwhelmingly digital age buyer group.

This trend even goes to driving tendencies. Sports cars owners tend to be a little less patient on the stop light than station wagon drivers. The gigantic proportions of some SUVs tend to make their owners bully smaller sized vehicles in rush hour traffic.

Brands like Lexus are tend to be bought by wealth and well educated owners. Aside from that demographic the brand caters mostly to married couples. This reflects stability and a more settled down personality for the buyers.

Your choices in the car you are driving very much reflect your personality. Stop thinking of your car as something that takes from one place to another but take great care in choosing your car. You may not think it matters but your peers will gauge your personality on the car you drive.

What Are Examples of Gourmet Foods?

The definition of gourmet food is food that a connoisseur would enjoy – a gourmet. This means that even food prepared with every day ingredients could be considered gourmet food if it is prepared with loving care by a chef who knows how to cook very well. For example, my husband cooks a chicken jal frezi which is simply superb, so can be classes as a gourmet dish. If I cook the same dish it can’t be classed as gourmet food as I am not very good at making this particular dish- I don’t have the patience it needs to make it to perfection. If you can take ordinary ingredients, say peas, carrots, potatoes and lamb and cook them in a way which makes the dish superb, then this is an example of gourmet food.

If you think about individual items that are categorized as gourmet food then Beluga caviar would be a contender for the number one slot. Beluga is a type of sturgeon which lives in the Caspian Sea where it is caught by Russian and Iranian fishermen for its eggs (unfertilized) as caviar is raw fish roe (eggs). If you are a true gourmet, then you will know that real black Beluga caviar can only be eaten with a spoon which is not made of metal as metal reacts with the roe and it doesn’t taste as good if this happens. It is eaten with mother-of-pearl, bone or tortoise shell spoons (these are now illegal so you have to find antique ones). Part of the mystique and caché of caviar is the rituals that surround the eating of it.

Wild smoked salmon is also considered a gourmet item and this taste very different to the ubiquitous smoked salmon found in packaged slivers on supermarket shelves. Oysters (raw) would also be categorized as a gourmet item. These seafood items are rich in vitamins and minerals and are very good for our health, and I often wonder if they became so highly valued because of their nutritional content as the peasants of Europe just couldn’t afford them.

Peasants could however find truffles, another highly prized item, in forests if they knew which trees to find them under. Black truffles are the best (so it is said) but white ones have a lot going for them too. In Italy in delicatessens you can buy a few slivers of truffle to go in a dish, which makes them less expensive that buying a whole truffle. They can be added to a dish to make it an extra special one as you don’t need to use very much of a truffle for it to impart its unique flavour to a dish. They are very good added to rice which is cooked in champagne (a truly gourmet risotto).

Cheeses which have been lovingly made from ewe’s and goat’s milk by small dairy farmers are also highly prized gourmet items, and you can, increasingly, find these online. Brie would not be classed as a gourmet item unless it is ripe and gooey and made by the French cheese makers. The type so often found on supermarket shelves is not a gourmet cheese.

Chanterelle mushrooms can be gathered in the woods as long as you know what you are looking for. These are certainly gourmet mushrooms with their meaty flavour and beautiful golden-yellow colour. They grow under (not on) trees and have very distinctive trumpet-shaped tops. Fresh porcini and morel mushrooms are also considered gourmet food items.

You don’t have to pay the Earth for a gourmet dish. All you have to do is have the patience and the understanding of the nature and quality of your ingredients to produce your own gourmet food. (Although Beluga caviar is wonderful!)

IPv4 Vs IPv6 (Advantages and Disadvantages)

We can see the rapid growth of internet users in last few years and this increase also create challenges for internet management groups, stake holders and service providers. Day by day infrastructure of internet is expanding and we can even enjoy the service of internet in villages and remote areas. Increased of usage also increase online devices. In start internet protocol addressing (a specific IP addressing for each online entity) was designed on 32 bit and this scheme IP version called IPv4.IPv4 addressing is like 203.128.076.001. decimal is used to make the IPv4 addresses more palatable for humans and a 32-bit address becomes 4 decimal numbers separated by the period (.) character. If we calculate these decimal values and we can get the total number of devices can be participate on this protocol (256x256x256x256) = allows for 4,294,967,296 addresses. It is about 4 billion of addresses and in early days of internet no one can think, 4 billion slot will be full. here we shall discus some disadvantages of IPv4 as we have seen addressing capability problem and after that we shall go through the solution which will replace IPv4 and addressing structure of the new addressing scheme. we shall go through some disadvantages of IPv4 and new features of IPv6.

Rapid Growth of the Internet and the Exhaustion of the IPv4 Addressing

IPv4 allows for 4,294,967,296 addresses which is about 4 billion and IP allocation limits the public IP addresses to a few hundred million. Cause of this limitation companies using NAT (Network Address Translator) to map single public IP to multiple private IP addresses.

IPv4 Security at IP Level

When we communicate at public medium we need to encrypt data to maintain security and privacy. After a passage of time we have now security for IPv4 packets. This security knows as internet protocol security or IPSec but this is an optional for IPv4.

Internet Backbone Maintaining Large Routing Tables

In IPv4 network IDs allocation is very critical and currently more than 87000 routes in the routing tables of internet backbone routers today. The routing infrastructure is based on flat and hierarchical routing.

Quality of Service Concern in IPv4

Now a days internet users are not only limited with browsing and searching data. Current users are well aware of text and voice and video chat and video conferences and online video libraries. This kind of communication need real time data transfer for quality of service. Normally for these kind of services we use UDP (User Data-gram Protocol) or TCP (Transmission Control Protocol).IPv4 TOS field has limited functionality and, over time, has been redefined and locally interpreted. Additionally, payload identification that uses a TCP or UDP port is not possible when the IPv4 packet payload is encrypted.

IPv6

As we can see we have some basic problems in practice of IPv4 now we will check some new features of IPv6. here I like to describe the some of basic features of IPv6. Deployment of IPv6 is a big challenge for internet management groups, stake holders and service providers. It is difficult but not impossible. We can see benefits of IPv6 here. Biggest upgrade jump from IPv4 32 bit to IPv6 128 bit.

IPv6 Header Format

New header is designed to minimize header overhead. by moving both nonessential and optional fields to extension headers that are placed after the IPv6 header. IPv6 header is more efficiently processed at intermediate routers and that generates efficiency. IPv6 is 4 time larger than IPv4 and its header size is twice than older version.

IPv6 Large Addressing Space

In IPv6 source and destination addresses is based on 128 bit. 128 bit addressing can produce over 3.4 x 1038 possible combinations. Currently we can say this is enough but who know about future may be it also face same problem like IPv4 after some decades. 128 bit addressing allow us multiple levels of sub-netting and address allocation. So we can say that we have plenty of address for use in future.

Addressing and Routing Infrastructure Efficiency in IPv6

IPv6 designed to create an efficient, hierarchical, and summarize able routing infrastructure that is based on the common occurrence of multiple levels of Internet Service Providers. It reduce the size of routing table of backbone routers. Which is can cause of efficient internet experience.

Security features is now built-in

IPv6 has been design to support IPsec (AH and ESP header support required) also support mobility version Mobile IPv6. IPSec based on two types of extension headers and a protocol to negotiate security settings. The Authentication header (AH) provides data integrity, data authentication, and replay protection for the entire IPv6 packet. It is better form developers who built-in security features in development of IPv6 rather we bolt on later.

Quality of Service (QoS) of IPv6

As we have already seen about the UDP and TCP protocols for streaming and other multimedia services on internet. Cause the usage of these services are increasing day by day IPv6 have a flow level field in its header which make better and special handling for packets from source to destination. Data traffic is identified in the IPv6 header, support for QoS can be achieved even when the packet payload is encrypted with IPSec and ESP.

How to Know If You Have Male Yeast Infection

Many males will be embarrassed by the fact that they have a yeast infection and will often not seek any medical help. A yeast infection is not something to be ignored and this article should help you to at least determine whether or not you have a yeast infection.

While, it is commonly said that a male yeast infection is a minor problem that can be eliminated by maintaining proper personal hygiene, the fact is that neglected male candidiasis can lead to severe health complications up to damaging the male reproduction organs. This is why it’s obligatory to learn about the symptoms of male yeast infection and ways to initially and properly diagnose the condition.

The following 5 categories will help you to know if you have a male yeast infection:

1. Painful

Things such a jock itch, burning sensations during sexual intercourse or urination. If the pain is server it is a good idea to see a doctor or seek out treatment immediately.

2. Visual

These include dry skin which may be flaky, redness of the penis head and in extreme cases a white discharge.

3. Indigestion

These will include problems such a constipation, diarrhea, intensive gas an in extreme cases even bad breath.

4. Fatigue

A simple lack of energy and mood swings.

5. Sexual dysfunction.

The inability to get or maintain an erection without pain occurring.

6. Dietary preferences changes

Most common of which are cravings for sweets and refined carbohydrates, etc. This is a bad thing because if you have a male yeast infection these types of foods should be minimized

Note that the last four male yeast infection category symptoms are associated with almost any other yeast infection subtype as well. This fact supports the widely accepted alternative medicine philosophy that claims that candida balanitis is first and foremost an internal problem that needs to be addressed holistically rather than a local or external condition.

If you are able to identify any of these symptoms then it is very likely that you have a male yeast infection. Many men are not very forthcoming about seeking help but this is a dangerous approach because a yeast infection should be looked at and treated as soon as possible.

Auto Mechanics Curriculum – Preparing for the Job of the Future

While taking driver’s education class in high school, for part of the curriculum, a man insisted his daughter take a basic auto mechanics class. They fought for weeks about this class. It was unnecessary. It was ridiculous. After all, she was a girl. After much verbal sparring, she took the class and enjoyed it, using her knowledge many times.

Years later, it became clear why the man wanted his daughter to take this class. Someday, her car would break down. The auto club would not always be able to come to her aid. Roadside assistance is not always available. Especially when the breakdown occurs in the middle of the desert. A person could wait hours for help. That could be dangerous. It was important to know how to fix the basics on her own.

When she became a parent, and her teenage daughter was ready to learn to drive, it was their turn to fight about taking the class. The mother insisted and her daughter relented. As it turns out, after much arguing, the student really enjoyed it. Since she did not have a “head” for business, or fashion, or mathematics, or English, or any other subject for that matter, it seems the one thing she excelled at was fixing cars.

After taking all of the basic classes the school had to offer, the student’s instructor suggested a transfer to the local high school that offered full vocational technical programs. The transfer took place, and for the next two years she took a number of classes like basic tune-ups and trouble-shooting, tire rotation and balancing, transmission repair, engine repair, fluid transfers for oil changes and transmission fluid, and air conditioning, among others. Upon graduation from high school, the student became a licensed auto mechanic.

For this young lady, that was not enough. She wanted to specialize in foreign cars. That required a whole new set of classes. Thus began her enrollment in the local college vo-tech. Another two years and she earned her A.S. Degree in Auto Mechanics. She was able to fix anything on wheels. However, as with any industry, evolution takes place. The new hybrid vehicles are already on the market, and the electric car is just around the corner. She continues with her education to maintain the high level of expertise necessary for the cars of the future.

Auto mechanic classes can help a student with their future. To become a mechanic, one must learn problem-solving skills. Mechanics is a process. So is life. One cannot put gas in a car that has no engine. Such is the same with life. One step at a time.

For students that struggle in school, vo-tech classes and auto mechanic classes have historically been extremely challenging. Their opportunities for success were once unlike the mother and daughter that both took auto mechanics classes and flourished.

Building A Custom Chopper Motorcycle, Where Do You Start?

So you want to build a custom chopper? I do too, so the first question I asked myself, is where do I start. Should I make a business plan, a schedule, a financial statement, or should I just buy my wife some flowers and blindly proceed? I guess I should do all of the above but not necessarily in that order.

I will start by trying to justify this purchase and or endeavor, to do this I will make a list of my reasons for building a Chopper. 1) I want to ride a custom chopper, a totally cool stretched out, fire breathing, gas eating, pavement pounding, old lady scaring, 2 wheel monster. 2) I want to be able to say “I built that” when someone asks me where I got that totally sick bike. 3) I want to be able to customize the bike beyond the standard add on parts I can get for my current bike a Harley Davidson Fatboy. 4) I want to be able to make this dream come true, meaning I need to be able to pay for it. A $35,000 chopper is out of my current budget. 5) I have been talking about this for 5 years so why don’t I get to it and stop doing all the talking and start doing some building.

Now I have a few reasons on paper a will look at my options, then make a plan, a schedule, and find some extra money.

Let’s start with a my build options, and plan on a slow and steady approach. I realize I will need to do a lot of research before I start. I have 4 basic options, a kit bike, a rolling chassis, a start from zero build, or an extreme makeover of a current motorcycle.

Option 1) If I start with a motorcycle kit I maybe the farthest ahead from a mechanical perspective, and farthest behind from a financial point of view. What do I mean by this, well a kit bike has all the parts it just needs paint, labor, gas, oil and some love. The problem a complete kit bike will cost me $12,000 dollars right up front. This is a bit out of my spend a ton of money now then not be able to ride a bike for a year or two thinking. If I get a kit, I maybe able to get it together faster, as I will be motivated and have all the parts ready to go. As a first bike I think this is a very good option, when you consider all the expensive mistakes I may make along that way. One drawback to this option is the amount of customization I can do to the bike as it is put together. Because all the parts are in the kit, I may resist the urge to get new bars or different sheet metal, or other parts.

Option 2) Start with a Rolling chassis, this is the middle of the road option, spend a lump sum of money, about 1/2 of what the overall bike will cost and get a basic setup that all works together.

A Rolling chassis kit consists of a Frame, 2 wheels, the forks, and triple clamps and bars, all build and configured to work together. Add a motor and a transmission and all the major workings of the bike are in place. This setup helps avoid some of the major work needed to mix match and fit these items together. This option also allows for a ton of customization in the parts that people see and the parts that give a bike it’s personality. For me this is a very serious option to consider. I would only have 1/2 the cost and 1/2 the parts sitting around and gathering dust until I get time to get it together.

Option 3) Find each and every part one at a time and build a completely custom motorcycle. I know I could do this, but I also know I will encounter more unexpected and possibly expensive issues with this type of build. This option would give me a bike that no one would ever duplicate. This could be very good or this could be very bad. What if some possible combination of frame, motor, forks, or wheels didn’t work together? It would not be discovered until the motorcycle was all together. I think this option is better left to the serious professional who build bike all night long, as the are working on other peoples bikes, and running businesses during the day. I may consider this for my second custom chopper.

Option 4) Take an existing bike and start cutting and changing it. This is maybe as involved as chopping and re-welding the frame to create a new rake and angles. Or it could mean just getting a new frame and using the engine, transmission, and various other part to build a new machine. I like this idea, and I think it would be a lower cost alternative to all new custom parts. With this option you are also able to keep the current registration and title if the frame is not replaced. This is also a lower cost option because a lot of the miscellaneous parts can be reused.

I know that in one page all the possible combinations of Custom Chopper build can’t be completely explained, I just hope this information give you something to start with and build on. It has help steer me in the direction of a rolling chassis, so I better get shopping.